Contact Download Site Map
 
Mechanical Agitator
Static Inline Mixer
Steam-Water Heater
Jet Mixer
Hybrid Mixing System
Mixing Consultancy
Vacuum & Compressed Gas System
Hydrocarbon Recovery System
 
 
 
Mixrite Jet Mixers also known as Mixing Eductors comprises of two critical components namely the motive nozzle and the diffuser. In Jet Mixing , a fast moving stream of liquid [ motive liquid ] is injected into a slow moving or stationary liquid [ secondary liquid ]. In Jet Mixer , the velocity difference between the jet and the secondary liquid creates a mixing layer of jet boundary.
This mixing layer grows in the direction of jet flow, entraining / mixing the bulk liquid into the jet. Jet Mixers can be used as substitute for Agitators in practically all the cases where the liquids to be mixed can be pumped. Some typical applications of Jet Mixers are mixing / blending, solid suspension, electro coating / pretreatment tanks, lube oil blending, neutralization tanks, storage tanks for homogenization etc.
 

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 
An established amount of motive liquid is pumped through a header into one or multiple jet mixers submerged within the tank. Depending on the application , the motive liquid can be recycled from the same tank or can be a another liquid drawn from a different source which is to be mixed with the tank contents under consideration. The static pressure at the entrance of the nozzle is converted into kinetic energy by allowing the fluid to flow freely through a convergent type nozzle. As the operating fluid exits the Jet Mixer nozzle, it entrains fluid from the tank through the suction chamber. The operating liquid along withentrained liquid then undergoes thorough mixing in the parallel section of the Jet Mixer diffuser. The divergent portion of the diffuser helps in converting the velocity head to pressure head at the discharge end of the Jet mixer. The discharge flow continues the mixing action of the liquid and imparts uniform mixing throughout the tank.
 
Salient Features of Jet Mixer
MMS Jet Mixers are Simple and Compact in construction.
MMS Jet Mixers offer Low capital and operating cost as compared to conventional agitators.
MMS Jet Mixers have no moving parts and hence Maintenance Free.
MMS Jet Mixers are easy to Install..
MMS Jet Mixers are designed to offer high energy efficiency.
MMS Jet Mixers are designed to have practically no dead spots in the tank..
MMS Jet Mixers offer High Degree of Operational Safety.
MMS Jet Mixers offer High Degree of Mixing per unit of Expended Energy.
Mixrite Jet Mixer Size can be Selected to Suit Existing Piipeline Size.
 
Mixrite manufactures as well as imports Jet Mixers from global suppliers to meet with challenging applications and stringent delivery requirements.
Jet Mixers are generally installed at the deepest point in the tank so that they are functional even at fluctuating liquid levels during filling and emptying operation of the tank.The number of jet mixers and their position in the tank is broadly based on Geometry and Size of the Tank, Type of liquids to be mixed and their transport properties, Mixing time, Max/Min liquid levels and the turnover rate.
 
Typical installation / orientation of the Jet Mixers is as shown in the figure.
 
 


MIXER MODEL


J20

J25

J40

J50

J80

J100

J150

J200

0.7

3.5

5.0

7.0

14.0

32.5

57.0

137.0

228.0

1.4

5.0

7.0

9.5

20.0

46.0

80.5

193.0

323.0

2.1

6.0

9.0

12.0

24.0

56.5

99.0

236.5

395.5

2.8

6.5

10.0

14.0

27.5

65.0

114.0

273.0

456.5

3.5

8.0

11.0

15.5

30.5

72.5

128.0

305.5

510.5

4.2

8.5

12.5

17.0

33.5

80.0

140.0

335.0

559.0

4.9

9.0

14.0

18.5

36.5

86.0

151.0

361.0

604.0

5.6

9.5

15.0

20.0

39.0

92.0

161.5

386.5

645.5

6.3

10.0

15.5

21.0

41.5

98.0

171.0

410.0

685.0

7.0

11.0

16.0

22.0

44.0

102.5

180.5

432.0

722.5